Servos are powered by the ESC’s output to the receiver. If you’re using a higher-strength servo than the ESC can support (usually greater than 20kg), you may experience ‘brown-outs’ where the radio signal can be interrupted and cause erratic driving. This can be helped by plugging a Glitch Buster into the receiver smoothing the current delivery. However, in some cases, you may need to install an external BEC.
Specifications
| Servo | |
|---|---|
| Servo Size: | 1/5 |
| Servo Spline Count: | 15 |
| Drive Motor Type: | Brushed |
| Gear Material: | Metal |
| Torque kg/cm: | 30 |
| Signal Type: | Digital |
| Case Material: | Metal |
| Rotational Degrees: | 120o (Normal) |
| 6.0v Sec/60 Degrees: | 0.21 |
| “A” Measurement: | 63.9 |
| “B” Measurement: | 65.8 |
| “C” Measurement: | 40.4 |
| “D” Measurement: | 23.5 |
| “E” Measurement: | 81.8 |
| “F” Measurement: | 30 |


Reviews
There are no reviews yet.